What is buckling? What should be the shape of a rod for preventing buckling?
(N/A) Buckling is a phenomenon where a structural member,such as a rod or column,undergoes a sudden change in shape (usually bending or bowing) when subjected to a high compressive load,even if the material has not reached its yield strength.
To prevent buckling,the rod should be designed to have a high moment of inertia. This is achieved by increasing the cross-sectional area away from the neutral axis. Therefore,a hollow rod or a rod with an $I$-shaped cross-section is more effective at preventing buckling than a solid circular rod of the same mass.
To prevent buckling,the rod should be designed to have a high moment of inertia. This is achieved by increasing the cross-sectional area away from the neutral axis. Therefore,a hollow rod or a rod with an $I$-shaped cross-section is more effective at preventing buckling than a solid circular rod of the same mass.
Explore More
Similar Questions
An elevator cable can have a maximum stress of $7 \times 10^7\,N/m^2$ for appropriate safety factors. Its maximum upward acceleration is $1.5\,m/s^2$. If the cable has to support the total weight of $2000\,kg$ of a loaded elevator,the minimum area of cross-section of the cable should be ....... $cm^2$ $(g = 10\,m/s^2)$.
Difficult
View SolutionIn order to determine the Young's Modulus of a wire of radius $0.2 \, cm$ (measured using a scale of least count $= 0.001 \, cm$) and length $1 \, m$ (measured using a scale of least count $= 1 \, mm$),a weight of mass $1 \, kg$ (measured using a scale of least count $= 1 \, g$) was hanged to get the elongation of $0.5 \, cm$ (measured using a scale of least count $= 0.001 \, cm$). What will be the fractional error in the value of Young's Modulus determined by this experiment? (in $\%$)
DifficultJEE MAIN 2021
View SolutionTwo blocks of masses $1 \,kg$ and $2 \,kg$ are connected by a metal wire going over a smooth pulley. The breaking stress of metal is $\frac{40}{3 \pi} \times 10^6 \,N m^{-2}$. What should be the minimum radius of the wire used if it should not break (in $mm$)? $(g = 10 \,m s^{-2})$
For the tensile stress on the cross-section $PQRS$ to be maximum,$\theta =$ ......... $^o$
Medium
View Solution$A$ uniform wire (Young's modulus $2 \times 10^{11} \, Nm^{-2}$) is subjected to a longitudinal tensile stress of $5 \times 10^7 \, Nm^{-2}$. If the overall volume change in the wire is $0.02\%$,the fractional decrease in the radius of the wire is close to:
Vedclass Products
For Students
Vedclass Test Series
Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.
Start Free TrialFor Teachers
Exam Paper Generator
Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.
Try FreeFor Institutes
Online Exam Module
Live online exams with unlimited students, 360° analytics & white-label branding.
See Demo